All-terrain action – no assembly required!
The 1/10 scale Axial Wraith Rock Racer 4WD RTR delivers impressive speeds on any terrain, with no assembly required! Includes a 20T 540 motor, an AE-2 ESC, a 2.4GHz radio system, a six-LED light kit and more. Requires a 6-cell NiMH or 7.4V LiPo battery and 8 “AA” cells. 

• Composite full tube chassis with composite skidplate. 
• Four-wheel shaft drive with splined plastic slider and screw shaft for a more positive lock to the output shaft. 
• Castle™ Creations AE-2 forward/reverse ESC with LiPo cutoff, drag brake and standard connector. 
• Compatible with the Castle Link™ USB Programming Kit (sold separately). 
• Oil shocks with silicone diaphragms and bushings. 
• All feature 0.13 in. (3.5 mm) titanium nitride-coated shafts. 
• Transmission is equipped with a slipper clutch and steel output gears. 
• Drivers can also upgrade it to handle a three-function 'Dig' feature. 
• Four-link suspension. 
• Cockpit offers console and gauge detail, with licensed Corbeau® LG1 race seats. 
• Locked diffs allow easy access for rebuilding and maintenance. 
• Optimized steering geometry with adjustable caster/Ackerman. 
• Battery tray is sized for standard 6-cell NiMH stick packs or 7.4V (2S) LiPo packs up to 1.8 in. (47 mm) wide, 5.9 in. (150 mm) long and 1.1 in. (28 mm) high.
  2.2 in. (56 mm) 
• Ripsaw™ tires.
  2.2 in. (56 mm) black/chrome 
• Rebel™ 8-spoke wheels with a 0.5 in. (12 mm) hex mount.

FEATURES:

Chassis: Full tube composite construction with composite skidplate
Drive: Four wheel shaft with splined plastic slider and screw shaft for a more positive lock to the output shaft
Radio: AX-3 2.4GHz 2-channel with throttle and steering reverse and trim, metal gear steering servo and waterproof receiver box
Motor: 20T ESC: AE-2 forward and reverse with drag brake
Transmission: Steel output gears and slipper clutch equipped, upgradable for three function Dig feature
Differentials: Locked type with easy access for rebuilding and maintenance
Suspension: Four link Shocks: Oil-filled with silicone diaphragms and bushings and 3.5mm titanium nitride coated shafts
Cockpit: Console and gauge detail with licensed Corbeau LG1 race seats
Battery Tray: Sized for 6-cell 7.2V standard stick packs or 2S LiPo pack up to 1.8" (47mm) wide, 5.9" (150mm) long, 1.1" (28mm) high Tires: 2.2" Ripsaw Wheels: 8-spoke 2.2" Raceline Renegade black and chrome, 12mm hex mount
Lights: Four front and two rear with 14 included light buckets that hold 3mm and 5mm lights (LEDs not included)

SPECS:

Wheelbase: 13.9" (353mm)
Width: 11.02" (280mm)
Height: 9.3" (237mm)
Length: 19" (483mm)
Ground Clearance: 3.15" (80mm)
Weight: 5.44lbs (2.48kg)